How Can A Weekly Ghost Immobiliser Problems Project Can Change Your Life > 커뮤니티 카카오소프트 홈페이지 방문을 환영합니다.

본문 바로가기

커뮤니티

커뮤니티 HOME


How Can A Weekly Ghost Immobiliser Problems Project Can Change Your Li…

페이지 정보

작성자 Carmine 댓글 0건 조회 13회 작성일 24-04-30 11:09

본문

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable possession from theft. This system is discrete and does not require additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence that can be up to 20 presses long. This then authorizes the startup of your vehicle.

Simple PIN code Change Process

With the rising rate of vehicle theft, a lot cost of ghost immobiliser owners are looking to improve their security. There are many types of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of them are equally effective at protecting your vehicle. While a tracking system may assist you in locating your vehicle in the case of theft, it can not stop the crime from occurring in the first instance. An immobiliser, on the contrary, does exactly what it says on the tin: it shuts down the engine of your car to prevent it from being started. The autowatch ghost immobiliser (Full Document) is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your car.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done using the window, heater or indicator stalk buttons. In addition to this, there is also a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is an excellent option for those who want to offer your car to valet parking or for maintenance. The immobiliser remains in operation.

The Ghost is an innovative and unique device that works with your vehicle's buttons rather than as a separate unit. It is not only an effective deterrent for vehicle theft, but it can be used to secure any future vehicles you may own. This makes it a far better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your pride & joy from key cloning and hacking. It also blocks ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices, which is the most common method used by thieves to bypass the immobilisers in place.

The advantage of CAN data over conventional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, the centre console, or doors, to create a unique disarming sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can give your car to a valet or service without having to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a specific code. The system can be turned on or off through your smartphone's app, without the need for extra wires.

Standard factory immobilisers on vehicles work by having a transponder inside the key, which sends a signal to the ECU. The car will start when the correct code is sent. However, if a transponder from a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It shields your car from key cloning, hacking and even key theft. Only by physically towing your car away could a thief take it away and not be able drive it.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, as well as the door panels, to generate unique PIN codes that must be entered to use your vehicle. This is performed without the need for additional hardware, such as keys-fobs, and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code-grabbing technology to determine if a security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be removed or disabled by thieves. It is more difficult to remove from a car alarm which requires disarming using a button sequence. This makes it a fantastic complement to an GPS tracking device that can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You do not have to look far on social media for stories or videos of cars that have been stolen with the most advanced technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original keys.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an extra layer of security in order to keep your vehicle from being targeted by thieves. It creates a unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and the centre console. The unique pin code must be entered along with your original key fob in order to stop the vehicle from starting. The unique override pin can be found on a black card which you will receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine the security system you have installed. This makes it a great alternative to the tracking device.

Contrary to other security systems which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

They can also be connected to an analog alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They also work with valet/service modes and an excellent alternative to a tracking device when you take your car to the dealer to address an electrical issue.

Service/Valet Mode

In recent times, there has been a increase in vehicles being stolen with no owner's keys. With the ease of access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to steal your prized possessions. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your car has been stolen.

It communicates directly with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent as it doesn't use radio frequencies or key fobs. This means it isn't detected by diagnostics or other car hacking devices. It also prevents the addition of an additional key or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console & door panels. Before you can begin your car, you must enter a unique and changeable PIN code up to 20 digits.

This is the first aftermarket immobiliser CAN bus that has been designed to stop your car from being started or driven away without a PIN code being entered before. If the device is in armed and you attempt to drive away, it will display a warning on your dash that will flash continuously for about 300m. If you enter your PIN code at this point, it will disarm the anti-hijack device and your car will continue to operate just as normal. If you do not enter your PIN in this moment the indicator autowatch Ghost immobiliser will continue to flash and require a new PIN every time you try to start your car.310300814_438157535072560_441431797686435441_nlow.jpg

댓글목록

등록된 댓글이 없습니다.