The One Ghost Immobiliser Problems Trick Every Person Should Learn > 커뮤니티 카카오소프트 홈페이지 방문을 환영합니다.

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the ghost car immobiliser Immobiliser. This system is discrete and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to generate a unique pin code sequence that can be altered up to 20 times. This then authorizes the vehicle to start.

Simple PIN code Change Process

With the rising rate of vehicle theft, many owners are looking to improve their security. There are a myriad of aftermarket security devices available, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your vehicle. While a tracking system can assist in finding your car in the case of theft, it can not stop the crime from happening in the first in the first place. Immobilisers, on the contrary are exactly what they state on the tin: they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car The ghost device generates an exclusive sequence that has to be entered prior to the engine starts. This can be done via the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This is a great option for those who want to offer your car to valet parking or servicing. The immobiliser will stay in operation.

The Ghost is a unique and innovative device which works in conjunction with the buttons of your car rather than as a separate device. It is not only an effective deterrent for vehicle theft, but it can be used on future vehicles you own. This makes it a much more cost-effective option than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is an advanced security device that shields your car from key cloning and hacking. It also blocks ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to ensure that it works with all vehicles. It also is resistant to jamming devices, which are a common technique that car thieves use to bypass immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or doors, to create unique sequences for disarming. This sequence can be extended 20 or more presses to provide additional security. The iPhone app allows a single, authorised connection, with a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service to be serviced without needing to enter a pin code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from performing its normal initialization process until you enter a custom passcode. The system can be activated and deactivated by using your smartphone's app without the need for wires.

The standard factory immobilisers function by using a transponder, which is built into the key. It transmits a message to the ECU. The car will start if the correct code is sent. If, however, the transponder from a different vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of car security systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. The only way thieves could take your car is by physically towing it away and even then they wouldn't be allowed to drive it.

Ghost uses buttons on your vehicle, including the indicator stalk, the steering wheel, as well as the door panels, to generate a unique PIN code that needs to be entered in order to use your vehicle. This is done without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be disabled or removed by thieves. It's even more difficult to get rid of from a car alarm which requires disarming via an action sequence. This makes it a perfect alternative to a GPS tracker, which can help locate your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look very far on social media for stories or videos about cars that have been stolen using the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle without your original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It creates an individual pin code push sequence using your existing buttons on the steering wheel, door panel, and the center console. This unique PIN must be entered along with your original key fob in order to prevent the vehicle from beginning. The unique override pin is located on a black card that you will receive after the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, therefore it can't be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to the tracker.

In contrast how to install ghost immobiliser (ravn-mathiassen-2.blogbright.net) other security systems that use a relay in the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

They can also be connected to a separate alarm, immobiliser or tracker. This must be specified prior to installation. They are also compatible with service/valet modes and is a great alternative to a tracking device when you take your car to the dealer for repairs to an electrical issue.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. It's now more easy than ever to take your joy and pride due to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely silent since it doesn't utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also prevents the addition of a new key or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence of up to 20 digits must be entered prior to being able to start your vehicle.

This is the first aftermarket CAN bus immobiliser that has been created. It will stop your vehicle from being driven or started in the event that you do not enter a PIN number first. If you're driving away with the device arming, an indicator will appear on your dashboard which will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run as normal. If you do not enter your PIN at this point, the warning will keep flashing & will require a new PIN code every attempt to start your vehicle.